Weaving My Letter S (TL) with Diamond Twill.
Diamond twill might seem to be puzzling at the start, but when one gets the pattern, it is a systematic and repeatable procedure. Therefore, it is in the wake of viewing How To Weave Diamond Twill that I got to know how minor variations in a repeating pattern can be applied to come up with a deliberate design. In this project, I used the over-and-under arrangement of the strips by placing my initials, TL, directly into the cloth by adapting the order.
The procedures that I used are listed in the following, detailed to the extent that another person can recreate the onset of the weave of the original piece.
Materials Needed:
– Weaving pieces of paper or fabric.
– Flat working surface
– Pencil
 Step 1: Start with a number of vertical strips placed in a flat evenly. These strips constitute the basis of the weave.
It is worth keeping the strips straight and spacing them evenly as the inconsistency will later cause alteration in the pattern of diamond.
Step 2: Begin the Diamond Twill Pattern. Use the first horizontal strip and cross it over two vertical strips and then under two vertical strips; under two vertical strips and over two vertical strips and so on all the way down the row.
To obtain the second horizontal strip, move the pattern one strip. This implies that it is to be started with below two, then above two and this is what initiates the diagonal movement necessary to the diamond twill.
Step 3: Develop Diamond Structure. Add horizontal strips continuing to move the pattern up the row by a little. These movements form diagonal lines which eventually intersect to form diamond shapes.
The consistency of the shift is important in ensuring that the pattern is symmetrical.
Step 4: Stitching the Letters T and L. To form the T, I kept a similar over (or under) pattern in a vertical line over several rows which could constitute the main stem. The cross of the letter was finished by a short horizontal change towards the top. To make the L, I simply took the line of the vertical and applied the same technique and then took one more line in the direction of the bottom to make the lower base of the letter horizontal.
The fact that the letters were planned to be placed in advance, allowed them to be placed in the center and readable as part of the pattern.
Step 5: Final Adjustments After the initials were completely weaved I pulled the weave by pushing the strips together and flattening the edges. This served to make the pattern of the diamond and the initials more definite.
Reflection:
This weaving practice demonstrated that a system, such as diamond twill, can be structured and remain creative and personalized. With slight modifications in a repeated pattern, meaningful designs can be hidden within the fabric. This procedure strengthened the collaboration of planning, structure, and deliberate variation in physical weaving and digital design.